- 4 mm installation height
- 10 W/m
- Aluminium screen (100% shielded)
- 12-year warranty
- CE-marked in accordance with EN 60335-1 and 60335-2-96
|Product number||Description||Length||100 W/m² (C-C = 10 cm)||150 W/m²(C-C = 6,6 cm)|
|189B6100||Veria Flexicable 10 - 100 W||10 m||1.0 m²||0.7 m²|
|189B6102||Veria Flexicable 10 - 200 W||20 m||2.0 m²||1.3 m²|
|189B6104||Veria Flexicable 10 - 300 W||28 m||2.8 m²||1.9 m²|
|189B6106||Veria Flexicable 10 - 400 W||41 m||4.1 m²||2.7 m²|
|189B6108||Veria Flexicable 10 - 500 W||50 m||5.0 m²||3.3 m²|
|189B6110||Veria Flexicable 10 - 600 W||57 m||5.7 m²||3.8 m²|
|189B6112||Veria Flexicable 10 - 700 W||70 m||7.0 m²||4.7 m²|
|189B6114||Veria Flexicable 10 - 800 W||81 m||8.1 m²||5.4 m²|
|189B6116||Veria Flexicable 10 - 900 W||90 m||9.0 m²||6.0 m²|
|189B6118||Veria Flexicable 10 - 1,000 W||100 m||10.0 m²||6.7 m²|
|189B6120||Veria Flexicable 10 - 1,250 W||129 m||12.9 m²||8.6 m²|
|189B6122||Veria Flexicable 10 - 1,400 W||140 m||14.0 m²||9.3 m²|
|189B9138||Veria tape set|
|189B4040||Veria Control B35|
|189B4050||Veria Control B45|
|189B4060||Veria Control T45|
|189B4070||Veria Control ET45|
Low installation height
Veria Flexicable 10 has a continuous effect of 10 W/metre, which, combined with its low installation height of just 4 mm, makes the Veria Flexicable 10 the ideal choice when renovating an existing floor.
The cable can be installed directly on the substrate. The easiest way to affix it is by using VeriaFix double-sided tape or similar, although it can also be secured using a glue gun.
The heating cable is equipped with a fully protective aluminium screen, which is connected to the earth connection of your electrical installation. Should the cable break unexpectedly, the built-in screen connection will immediately shut down the system - without any risk to people or animals.
Select the correct output
The area that a given cable can cover depends on the desired output per square metre, and thus on which c-c distance cables are installed with it.
The recommended output depends in part on the room's insulation, and partly on the floor's surface and substrate materials.
For a wooden or laminate subflooring, as well as for a wooden and laminate floor covering, a maximum output of 100 W/m² is recommended.
For a concrete or tile subflooring, as well as for a regular or quarry tile floor covering, a maximum output of 150 W/m² is recommended.